Lafferty Low Volume Hand-Held Airless Split System Foamer 969912-LV | Hose-End Foam Gun

EACH

Code: VO07 969912-LV

Brand: BRAVO

PRODUCT DESCRIPTION

Lafferty Low Volume hand-held, hose-end airless split system foamer (code 969912-LV) for diluting and applying foam-based cleaning chemicals using water pressure alone, with no compressed air required.
Split system design connects to various sizes of chemical containers and to a garden hose, and produces a wet foam to improve chemical effectiveness. Throw distance is up to 1.5m.
Works with water pressure as low as 20 psi and includes 20 colour-coded metering tips to set different dilution ratios. Suited to small areas such as containers and cold rooms.
Suits commercial kitchens, food preparation areas, cold rooms, hospitality venues, food processing and general janitorial cleaning where foam application is required.

MATERIALS

Venturi injector: draws chemical concentrate from the container and blends it into the water stream using water pressure, with no moving parts or compressed air.
Colour-coded metering tips: 20 tips set the chemical dilution ratio.
Foam wand and gun: mixes air into the diluted solution to create wet foam and directs it onto the surface.
Construction materials: not verified for this exact model. Refer to the manufacturer's product information.

SAFETY DIRECTIONS

Read the label and Safety Data Sheet of the chemical used with this foamer, and wear the PPE it specifies, such as gloves and eye protection.
Use only chemicals that are suitable for foaming and compatible with the foamer. Do not mix different chemicals.
Point the foam gun away from people, electrical equipment and power points while in use.
Rinse the unit with clean water after use and store it clean and out of reach of children, following the manufacturer's instructions.

ECO RATING

A reusable applicator that can be refilled from chemical containers, so it avoids single-use trigger sprayers.
Metering tips set the dilution ratio, which helps reduce chemical use and over-application.
Foam gives visible confirmation of coverage and increases contact time, which can reduce repeat applications.

Connect the foamer to the chemical container and to a garden hose or water supply.
Fit the colour-coded metering tip that gives the required dilution